Events¶

Any action, available to be performed by means of API (including custom scripts running), should be bound to some event and executed as a result of this event occurrence.

Each event triggers a particular action on the required application's lifecycle stage. The entry point for executing any action is the onInstall event.

Events Execution Rules¶

Such events as onBeforeDelete and onAfterDelete (which refer to an environment deletion) can be executed just once. Other events can be used as much times as required.
The scaling events (onBeforeScaleOut/onAfterScaleOut, onBeforeScaleIn/onAfterScaleIn, onBeforeServiceScaleOut/onAfterServiceScaleOut, onBeforeSetCloudletCount/onAfterSetCloudletCount) are called once upon any node count change. Herewith, count of the addNode or removeNode actions’ execution refer to the number of nodes that should be added/removed per a single scaling event.
For application server, load balancer and VPS node layers, the onBeforeCloneNodes/onAfterCloneNodes events are executed each time the node group is scaled out.
The onBeforeLinkNodes/onAfterLinkNodes, onBeforeUnlinkNodes/onAfterUnlinkNodes, onBeforeSetEnvVars/onAfterSetEnvVars, onBeforeSetEntryPoint/onAfterSetEntryPoint, onBeforeSetRunCmd/onAfterSetRunCmd, onBeforeAddVolume/onAfterAddVolume and onBeforeRemoveVolume/onAfterRemoveVolume events can be executed only once per a single changeTopology action.
The onBeforeStartService/onAfterStartService event can be called only once while performing the changeTopology and createEnvironment actions.

Events Filtering¶

Events can be filtered by any input parameters. As a result, the action is executed only when the called event matches specified filtering rules. Parameter name (e.g. myalert) can be specified via a colon: onAlert [name:myalert]. Input parameters list is described for every event within ${event.params.}. Also, it is possible to filter events with comma-separated list of the parameters (onBeforeRedeployContainer [nodeGroup:cp, sequential:true, useExistingVolumes:true]). In case the parameter name is not specified via colon, engine tries to determine parameter as a nodeID, if it’s not possible, then it tries to determine a nodeGroup, if it’s not possible, after that it tries to determine a nodeType. Finally, if no filtering rules are specified, no event triggers.

The following example describes the events filtering by nodeGroup (for the onAfterScaleOut event), nodeType (for the onAfterRestartNode event), and nodeId (for the onAfterResetNodePassword event). Here, filtering by the compute node group ([cp]) is set so that the action is executed after compute nodes are scaled out. The nodeType filtering is set so that the action is executed after Apache 2 nodes are restarted. The nodeID filtering is set so that the action is executed after a password from the first compute node in the layer is reset.

type: update
name: Event Subscription Example

onInstall:
  createFile [cp]: /tmp/result.txt

onAfterScaleOut [cp]:
  cmd [cp]: echo 'New Compute node has been added' >> /tmp/result.txt

onAfterRestartNode [nodeType:apache2]:
  cmd [cp]: echo 'Compute node with ID - ${events.response.nodeid} has been restarted' >> /tmp/result.txt

onAfterResetNodePassword [${nodes.cp[0].id}]:
  cmd [${nodes.cp[0].id}]: echo 'First compute node has been restarted' >> /tmp/result.txt

{
  "type": "update",
  "name": "Event Subscription Example",
  "onInstall": {
    "createFile [cp]": "/tmp/result.txt"
  },
  "onAfterScaleOut [cp]": {
    "cmd [cp]": "echo 'New Compute node has been added' >> /tmp/result.txt"
  },
  "onAfterRestartNode [nodeType:apache2]": {
    "cmd [cp]": "echo 'Compute node with ID - ${events.response.nodeid} has been restarted' >> /tmp/result.txt"
  },
  "onAfterResetNodePassword [${nodes.cp[0].id}]": {
    "cmd [${nodes.cp[0].id}]": "echo 'First compute node has been restarted' >> /tmp/result.txt"
  }
}

where:

type - update type presupposes the add-on installation to the existing environment with the predefined listeners for events
onInstall - entry point for executing actions
- cp - target node group
onAfterScaleOut - event that triggers the action after adding a new compute node
onAfterRestartNode - event that triggers the action after restarting apache2 compute nodes
onAfterResetNodePassword - event that triggers the action after resetting a password from the first compute node in the layer

There are few options to filter executed events:

onBeforeRestartNode [cp] or [apache] or [1234] - short filters for events
onBeforeRestartNode [nodeGroup: cp] or [nodeType: apache] or [nodeId: 1234] - full filters sets
Combines of different simple filters from first or second points above in one - onBeforeRestartNode[1234, 5678] (executing event only on nodes checked by unique identifiers) or onBeforeRestartNode[nodeGroup: cp, nodeId: 123]

Such reserved keywords like nodeGroup, nodeType and nodeId in event filtering are not case sensitive, so they can be declared in any way.

Events Execution Sequence¶

Below you can find the graphs that list actions with adjoining events. Every action has a pair of adjoining events - one of them is executed before the action and another one is launched after the action, that is when the action is finished.

Note

The createEnvironment action does not have any adjoining events, because events are bound after the environment creation.

The changeTopology actions are considered quite time-consuming while being performed via the Jelastic dashboard, therefore, you can automate their workflow with the following CS actions and related events.

Another demanded actions are related to scaling procedures. The following graph provides a sequence of scaling actions and related events.

Event List¶

onInstall¶

The onInstall event is the entry point for executing any action. If the installation type is install, the onInstall event is triggered right after the environment creation. If the installation type is update, onInstall is the first event that is performed during the manifest installation.

onUninstall¶

The onUninstall event can be called from the Add-ons tab at the Jelastic dashboard. This event is aimed at removing data accumulated through actions that are triggered by the onInstall event.

uninstall

onBeforeChangeTopology¶

The event is executed before changing environment topology via the Jelastic dashboard.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodes - nodes array with detailed info about the topology change
- env - environment settings, e.g. engine, ssl, ha, region etc
${event.response.} parameters are absent

onAfterChangeTopology¶

The event is executed once the changeTopology action is finished.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodes - nodes array with detailed info about the topology change
- env - environment settings, e.g. engine, ssl, ha, region etc
${event.response.}:
- result - result code. The successful action result is '0"
- envGroups - environment groups array
- right - account right for environment
- nodeGroups - node delays:
  - restartNodeDelay - delay for restart
  - name - node group name
  - redeployContainerDelay - delay for container redeployment
  - redeployContextDelay - delay for context redeployment
  - restartContainerDelay - delay for container restart
- nodes - nodes array with detailed info about the topology change. Explore the full list of available node placeholders.
- env - environment information. Explore the full list of available environment placeholders.

onBeforeScaleOut¶

The event is executed before adding new node(s) (i.e. scaling out) to the existing node group (layer). Scaling in/out can be performed either through changing topology or auto horizontal scaling functionality. The onBeforeScaleOut event is run once for each layer upon any node count change.

Event Placeholders:

${event.params.}:
- count - number of nodes that are added
- nodeGroup - node group that is scaled out
${event.response.} parameters are absent

onAfterScaleOut¶

The event is executed after adding new node(s) to the existing node group. The onAfterScaleOut event is run once for each layer upon any node count change.

Event Placeholders:

${event.params.}:
- count - number of nodes that are added
- nodeGroup - node group that is scaled out
${event.response.}:
- nodes - nodes array with detailed info about topology. Explore the full list of available node placeholders.

onBeforeScaleIn¶

The event is executed before removing node(s) (i.e. scaling in) from the target node group. The onBeforeScaleIn event is run once for each layer upon any node count change.

Event Placeholders:

${event.params.}:
- count - number of nodes that are removed
- nodeGroup - node group that is scaled in
${event.response.}:
- nodes - nodes array with detailed info about topology. Explore the full list of available node placeholders.

onAfterScaleIn¶

The event is executed after scaling in the corresponding node group. The onAfterScaleIn event is run once for each layer upon any node count change.

Event Placeholders:

${event.params.}:
- count - number of nodes that are removed
- nodeGroup - node group that is scaled in
${event.response.}:
- nodes - nodes array with detailed info about topology. Explore the full list of available node placeholders.

onBeforeServiceScaleOut¶

The event is executed before adding new Docker container(s) to the existing node group. It is run once for each layer upon any node count change. The onBeforeServiceScaleOut event is applicable only for Docker containers.

Event Placeholders:

${event.params.}:
- count - nodes count which have been added
- nodeGroup - node layer where event is executed
${event.response.}:
- nodes - nodes array which will be added to the environment. All parameters from that array can be used in a same action as placeholders value. For example, placeholder {event.response.nodes[0].url} will be an address of first added node.

onAfterServiceScaleOut¶

The event is executed after adding new container(s) to the existing node group. It is run once for each layer upon any node count change. The onAfterServiceScaleOut event is applicable only for Docker containers.

Event Placeholders:

${event.params.}:
- nodeGroup - node layer where event is executed
- count - nodes count which have been added
${event.response.}
- nodes - nodes array which was added to the environment. All parameters from that array can be used in a same action as placeholders value. For example, placeholder {event.response.nodes[0].url} will be an address of first added node

onAlert¶

This event provides a possibility to bind actions to Load Alerts and Automatic Horizontal Scaling Alerts that are configured through the Jelastic triggers.

These monitoring triggers are based on the usage of the following resource types:

CLOUDLETS (CPU, Memory) - available only for the NOTIFY action type
CPU
MEM (Memory)
NET_EXT - external output and input traffic that are available only for the NOTIFY action type
NET_EXT_OUT - external output traffic
DISK - disk space amount that is available only for the NOTIFY action type
INODES - available only for the NOTIFY action type
Disk I/O - disk input/output rate
Disk IOPS - disk input/output rate (in operations per second)

The units of measurement are PERCENTAGE and SPECIFIC. The second value is available only for NET_EXT and NET_EXT_OUT resource types.

The following example illustrates the subscription to the onAlert event. Here, the log action is executed if one of the triggers within the compute ([cp]) layer is invoked.

type: update
name: AddTrigger

onAlert [cp]:
  log: onAlert event has subscribed

{
  "type": "update",
  "name": "AddTrigger",
  "onAlert [cp]": {
    "log": "onAlert event has subscribed"
  }
}

In the following example, the log action is executed if the invoked trigger is subscribed to the onAlert event with the custom_name.

type: update
name: AddTrigger

onAlert [name:custom_name]:
  log: onAlert event has subscribed

{
    "type": "update",
    "name": "AddTrigger",
    "onAlert [name:custom_name]": {
        "log": "onAlert event has subscribed"
    }
}

trigger name

The trigger name can be set up through the dashboard as on the picture above or as described in the example as follows.

The following example shows how a new trigger is being created.

type: update
name : AddTrigger

onInstall:
  environment.trigger.AddTrigger:
    data:
      name: new alert
      nodeGroup: sqldb
      period: 10
      condition:
        type: GREATER
        value: 55
        resourceType: MEM
        valueType: PERCENTAGES
      actions:
        - type: NOTIFY
          customData:
            notify: false

{
  "type": "update",
  "name": "AddTrigger",
  "onInstall": {
    "environment.trigger.AddTrigger": {
      "data": {
        "name": "new alert",
        "nodeGroup": "sqldb",
        "period": "10",
        "condition": {
          "type": "GREATER",
          "value": "55",
          "resourceType": "MEM",
          "valueType": "PERCENTAGES"
        },
        "actions": [
          {
            "type": "NOTIFY",
            "customData": {
              "notify": false
            }
          }
        ]
      }
    }
  }
}

This example involves execution of the Jelastic API addTrigger method with a set of required parameters:

name - name of a notification trigger
nodeGroup - target node group (you can apply trigger to any node group within the chosen environment)
period - load period for nodes
condition - rules for monitoring resources
- type - comparison sign, the available values are GREATER and LESS
- value - percentage of a resource that is monitored
- resourceType - types of resources that are monitored by a trigger, namely CPU, Memory (RAM), Network, Disk I/O, and Disk IOPS
- valueType - measurement value. Here, PERCENTAGES is the only possible measurement value. The available range is from 0 up to 100.
actions - object to describe a trigger action
- type - trigger action, the available values are NOTIFY, ADD_NODE, and REMOVE_NODE
- customData:
  - notify- alert notification sent to a user via email

The Jelastic engine sends an alert notification to the Cloud Scripting system when the appropriate trigger is invoked. Therefore, the onAlert event provides a possibility to bind actions to alert notifications and execute custom actions.

Event Placeholders:

${event.params.}:
- name - alert name
- nodeGroup - nodeGroup where an alert is executed
- resourceType - resource type that is monitored
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeRestartNode¶

The event is triggered before restarting a node. It is called before the corresponding restartNodeById and restartNodeByGroup actions.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeType - node type where event is executed
- nodeGroup - node group (nodemission) where event is executed
- env - environment short name within which the event is called
- name - environment display name
${event.response.} parameters are absent

onAfterRestartNode¶

The event is triggered after restarting a node. It is called subsequently upon the restartNodeById and restartNodeByGroup actions.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeType - node type where event is executed
- nodeGroup - node group (nodemission) where event is executed
- env - environment short name within which the event is called
- name - environment display name
${event.response.}:
- nodeid - restarted node's identifier
- out - success output message
- result - result code. The successful action result is '0'

onBeforeDelete¶

The event is called before the deleteEnvironment action.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- password - user password
- env - environment short name (only domain name)
${event.response.} parameters are absent

onBeforeAddNode¶

The event is triggered before adding a new node to an environment. The onBeforeAddNode event is executed for each newly added node.

There are the following available node groups:

balancer
compute
cache
database
storage
VPS
build
docker

Event Placeholders:

${event.params.}:
- extipv4 [nubmer] - external IPv4 address count
- extipv6 [nubmer] - external IPv6 address count
- session - current user session
- appid - environment unique appid
- fixedCloudlets - reserved cloudlets
- flexibleCloudlets - dynamic cloudlets
- ismaster [boolean] - if true, then a new node is treated as the first (i.e. master) one in the current layer
- env - environment domain name
- tag - template tag
- nodeType - predefined node type
- nodetype - same as nodeType parameter
- nodeGroup - predefined node group
- nodegroup - same as nodeGroup parameter
- name - template node name
- fixedCloudlets - fixed cloudlets count for future node
- flexibleCloudlets - flexible cloudlet count
- diskLimit - current node disk limit
- startService [boolean] - value to start main service in container
${event.response.} parameters are absent

onAfterAddNode¶

The event is triggered after adding a new node to an environment. The onAfterAddNode event is executed for each newly added node.

There are the following available node groups:

balancer
compute
cache
database
storage
VPS
build
docker

Event Placeholders:

${event.params.}:
- extipv4 [nubmer] - external IPv4 address count
- extipv6 [nubmer] - external IPv6 address count
- session - current user session
- appid - environment unique appid
- fixedCloudlets - reserved cloudlets
- flexibleCloudlets - dynamic cloudlets
- ismaster [boolean] - if true, then a new node is treated as the first (i.e. master) one in the current layer
- env - environment domain name
- tag - template tag
- nodeType - predefined node type
- nodetype - same as nodeType parameter
- nodeGroup - predefined node group
- nodegroup - same as nodeGroup parameter
- name - template node name
- fixedCloudlets - fixed cloudlets count for future node
- flexibleCloudlets - flexible cloudlet count
- diskLimit - current node disk limit
- startService [boolean] - value to start main service in container
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeCloneNodes¶

The event is performed before cloning node in the environment. The process of cloning nodes presupposes that new nodes are cloned from the existing ones.

The onBeforeCloneNodes event is applicable only for the next node groups (excluding Docker nodes):

compute
balancer
VPS

Event Placeholders:

${event.params.}:
- count - number of nodes to be cloned
- session - current user session
- appid - environment unique appid
- nodeGroup - node group
- nodegroup - same value as nodeGroup
- env - environment short name
- name - environment display name
${event.response.} parameters are absent

onAfterCloneNodes¶

The event is performed after cloning node in the environment.

The onAfterCloneNodes event is applicable only for the next node groups (excluding Docker nodes):

compute
balancer
VPS

Event Placeholders:

${event.params.}:
- count - number of nodes to be cloned
- session - current user session
- appid - environment unique appid
- nodeGroup - node group
- nodegroup - same value as nodeGroup
- env - environment short name
- name - environment display name
${event.response.}:
- result - result code. The successful action result is '0'.
- className - class name for a new node info, viz. "com.hivext.api.server.system.persistence.SoftwareNode"
- array - new nodes array

onBeforeLinkNode¶

The event is executed before linking nodes to apply configurations to IP addresses. It is compatible only with compute and balancer node groups and excludes Docker nodes.

Event Placeholders:

${event.params.}:
- parentNodes - node identifiers for linking
- session - current user session
- appid - environment unique appid
- childNodes - node identifiers for linking with parent nodes
- env - environment short name
${event.response.}- parameters are absent

onAfterLinkNode¶

The event is executed after linking nodes to apply configurations to IP addresses. It is available only for compute and balancer node groups and excludes Docker nodes.

Event Placeholders:

${event.params.}:
- parentNodes - node identifiers for linking
- session - current user session
- appid - environment unique appid
- childNodes - node identifiers for linking with parent nodes
- env - environment short name
${event.response.}:
- result - result code. The successful action result is '0'.
- infos - info with result codes about all nodes' linkings:
  - result - result code

onBeforeAttachExtIp¶

The event is executed before attaching the external IP address. The onBeforeAttachExtIp event is triggered each time before the external IP address attachment.

Event Placeholders:

${event.params.}:
- nodeid - node identifier for attaching external IP address
- session - current user session
- envName - environment unique appid
- appid - application unique appid
- name - environment display name
- env - environment short domain name
${event.response.}:
- result - parameters are absent

onAfterAttachExtIp¶

The event is executed after attaching the external IP address. The onBeforeAttachExtIp event is triggered each time upon the external IP address attachment.

Event Placeholders:

${event.params.}:
- nodeid - node identifier for attaching external IP address
- session - current user session
- envName - environment unique appid
- appid - application unique appid
- name - environment display name
- env - environment short domain name
${event.response.}:
- result - result code. The successful action result is '0'.
- obejct [string] - attached external IP address

onBeforeDetachExtIp¶

The event is executed before detaching the external IP address. The onBeforeDetachExtIp event is triggered each time before the external IP address detachment.

Event placeholders:

${event.params.}:
- nodeid - node identifier for detaching external IP address
- session - current user session
- envName - environment unique appid
- appid - application unique appid
- ip - detached IP address
- name - environment display name
- env - environment short domain name
${event.response.} - parameters are absent

onAfterDetachExtIp¶

The event is executed after detaching the external IP address. The onAfterDetachExtIp event is triggered each time upon the external IP address detachment.

Event Placeholders:

${event.params.}:
- nodeid - node identifier for detaching external IP address
- session - current user session
- envName - environment unique appid
- appid - application unique appid
- ip - detached IP address
- name - environment display name
- env - environment short domain name
${event.response.}:
- result - parameters are absent

onBeforeUpdateVcsProject¶

The event is carried out before updating the VCS project. For a detailed guidance on the VCS project deployment, refer to the linked page.

Event Placeholders:

${event.params.}:
- projectId - project id
- session - current user session
- appid - environment unique appid
- envName - environment unique identifier
- context - project context name
- env - environment short domain name
- nodeGroup [optional] - predefined node group
- nodegroup [optional] - same value as nodeGroup
- nodeid [optional] - node unique identifier
- delay [optional] - delay between deploys on nodes (in case if mode than two nodes in one nodeGroup are available).
${event.response.}- parameters are absent

onAfterUpdateVcsProject¶

The event is carried out after updating the VCS project. For a detailed guidance on the VCS project deployment, refer to the linked page.

Event Placeholders:

${event.params.}:
- projectId - project id
- session - current user session
- appid - environment unique appid
- envName - environment unique identifier
- context - project context name
- env - environment short domain name
- nodeGroup [optional] - predefined node group
- nodegroup [optional] - same value as nodeGroup
- nodeid [optional] - node unique identifier
- delay [optional] - delay between deploys on nodes (in case if mode than two nodes in one nodeGroup are available).
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeSetCloudletCount¶

The event is executed before setting cloudlet count, which implies changing the number of allocated cloudlets per any layer in the environment.

Event Placeholders:

${event.params.}:
- fixedCloudlets - reserved cloudlets value
- flexibleCloudlets - dynamic cloudlets value
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
- nodegroup - same value as nodeGroup
- env - environment short domain name
- name - environment display name
${event.response.}: parameters are absent

onAfterSetCloudletCount¶

The event is executed after setting cloudlet count, which implies changing the number of allocated cloudlets per any layer in the environment.

Event Placeholders:

${event.params.}:
- fixedCloudlets - reserved cloudlets value
- flexibleCloudlets - dynamic cloudlets value
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
- nodegroup - same value as nodeGroup
- env - environment short domain name
- name - environment display name
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeChangeEngine¶

The event is performed before changing the engine's version (e.g. from php 7 to php 7.1) in the required environment. The onBeforeChangeEngine event is not compatible with Docker-based environments.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- settings - environment settings to change, i.e engine in the present case
${event.response.}:
- result - parameters are absent

onAfterChangeEngine¶

The event is performed after changing the engine's version (e.g. from php 7 to php 7.1) in the required environment. The onAfterChangeEngine event is not compatible with Docker-based environments.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- settings - environment settings to change, i.e engine in the present case
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeStart¶

The event is related to starting environment (executed from the Jelastic dashboard) and is triggered before it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- env - environment short domain name
${event.response.} - parameters are absent

onAfterStart¶

The event is related to starting environment (executed from the Jelastic dashboard) and is triggered after it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- env - environment short domain name
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeStop¶

The event is related to stopping environment (executed from the Jelastic dashboard) and is triggered before it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- env - environment short domain name
${event.response.}: parameters are absent

onAfterStop¶

The event is related to stopping environment (executed from the Jelastic dashboard) and is triggered after it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeClone¶

The event is related to cloning environment (performed via the Jelastic dashboard by means of the same-named button) and is triggered before it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- domain - cloned environment name
- srcenv - source environment, parent environment for clone.
- targetenv - cloned environment name. The same value as domain
${event.response.} - parameters are absent

onAfterClone¶

The event is related to cloning environment (performed via the Jelastic dashboard by means of the same-named button) and is triggered after it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- domain - cloned environment name
- srcenv - source environment, parent environment for clone.
- targetenv - cloned environment name. The same value as domain
${event.response.}:
- result - result code. The successful action result is '0'
- envGroups - environment groups array
- nodeGroups - node delays:
  - restartNodeDelay - delay for node restart
  - name - node group name
  - redeployContainerDelay - delay for container redeployment
  - redeployContextDelay - delay for context redeployment
  - restartContainerDelay - delay for container restart
- nodes - nodes array with detailed info about topology. Explore the full list of available node placeholders.
- env - environment information. Explore the full list of available environment placeholders.

onBeforeBuildProject¶

The event is related to build project action and is triggered before it (executed from the Jelastic dashboard).

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- project - project name in Jelastic dashboard
- env - environment name where action is executed
- nodeid - environment name where action is executed
- projectid - project unique identifier in Jelastic dashboard
${event.response.}:
- result - parameters are absent

onAfterBuildProject¶

The event is related to build project action and is triggered after it (executed from the Jelastic dashboard).

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- project - project name in Jelastic dashboard
- env - environment name where action is executed
- nodeid - environment name where action is executed
- projectid - project unique identifier in Jelastic dashboard
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeDeploy¶

The event is bound to the deploy action, which is executed at the Jelastic dashboard by deploying any context (i.e. archive with a compressed app) to the environment, and is triggered before it (viz. deploy action).

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- atomicDeploy [boolean] - deployment of a context to all nodes at once
- path - context path
- context - context name
- archivename - deployed context display name that is shown at the dashboard
${event.response.}:
- result - parameters are absent

onAfterDeploy¶

The event is bound to the deploy action, which is executed at the Jelastic dashboard by deploying any context (i.e. archive with a compressed app) to the environment, and is triggered after it (viz. deploy action).

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- atomicDeploy [boolean] - deployment of a context to all nodes at once
- path - context path
- context - context name
- archivename - deployed context display name that is shown at the dashboard
${event.response.}:
- result - result code. The successful action result is '0'
- responses - deploy result texts:
  - result - deploy result code for current node ID
  - out - deploy result text
  - nodeid - node identifier

onBeforeResetNodePassword¶

The event is bound to resetting a container default user password (executed at the Jelastic dashboard for vds nodeGroup via the Reset password button or via API methods ResetNodePassword, ResetNodePasswordByID, ResetNodePasswordByGroup) and is triggered before it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
${event.response.}:
- result - parameters are absent

onAfterResetNodePassword¶

The event is bound to resetting a container default user password (executed at the Jelastic dashboard for vds nodeGroup via the Reset password button or via API methods ResetNodePassword, ResetNodePasswordByID, ResetNodePasswordByGroup) and is triggered before it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeResetServicePassword¶

The event is bound to resetting a container main service password (executed at the Jelastic dashboard via the Reset password button) and is triggered before it. The event is applicable for services that have an Admin Panel enabled by default for the specific nodeType. These templates are:

nodeGroup	nodeType
bl	litespeedadc
cp	litespeedphp
sqldb	(all nodeTypes)
nosqldb	(all nodeTypes)

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
${event.response.}:
- result - parameters are absent

onAfterResetServicePassword¶

The event is bound to resetting a container main service password (executed at the Jelastic dashboard via the Reset password button) and is triggered before it. The event is applicable for services that have an Admin Panel enabled by default for the specific nodeType. These templates are:

nodeGroup	nodeType
bl	litespeedadc
cp	litespeedphp
sqldb	(all nodeTypes)
nosqldb	(all nodeTypes)

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeRemoveNode¶

This event is executed before deleting node(s) from your environment.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeid - predefined node identifier
${event.response.}:
- result - parameters are absent

onAfterRemoveNode¶

This event is executed after deleting node(s) from your environment.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeid - predefined node identifier
- env - the same value envName
- name - environment display name
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeRestartContainer¶

This event is carried out before restarting container. The onBeforeRestartContainer event is triggered before the restartConteinerById action.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
- nodeType - predefined node type
- envName - environment short domain name
- env - the same value envName
- name - environment display name
- nodeid - node unique identifier where method is executed
${event.response.} - parameters are absent

onAfterRestartContainer¶

This event is carried out after restarting container. The onAfterRestartContainer event is triggered after the restartConteinerById action.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeGroup - predefined node group
- nodeType - predefined node type
- envName - environment short domain name
- env - the same value envName
- name - environment display name
- nodeid - node unique identifier where method is executed
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeMigrate¶

The event is related to the migrating environment action and is called before it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- isOnline [boolean] - online migration that causes no downtime, if set to 'true', therefore, setting it as 'false' leads to the downtime
- hardwareNodeGroup - predefined hard node group
${event.response.} - parameters are absent

onAfterMigrate¶

The event is related to migrating environment and is called after it.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- isOnline [boolean] - online migration that causes no downtime, if set to 'true', therefore, setting it as 'false' leads to the downtime
- hardwareNodeGroup - predefined hard node group
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeRedeployContainer¶

This event is performed before the container redeployment. It is bound to the redeployContainerById and redeployContainerByGroup (i.e. redeployment of all containers in a layer) actions. The event is available for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- sequential [boolean] - containers sequential redeployment
- nodeGroup - predefined node group
- nodegroup - same value as nodeGroup
- name - environment display name
- env - environment domain name
- tag - chosen tag for redeploy
- useExistingVolumes - using volumes existing on nodes
${event.response.} - parameters are absent

onAfterRedeployContainer¶

This event is performed after the container redeployment. It is bound to the redeployContainerById and redeployContainerByGroup (i.e. redeployment of all containers in a layer) actions. The event is available for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- sequential [boolean] - containers sequential redeployment
- nodeGroup - predefined node group
- nodegroup - same value as nodeGroup
- name - environment display name
- env - environment domain name
- tag - chosen tag for redeploy
- useExistingVolumes - using volumes existing on nodes
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeLinkNodes¶

The event is executed before the linkNodes action. This event is run for each linking containers action. It is provided for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- groupAlias - alias for linking nodes
- alias
- sourceNodeId - source node for links storage
- sourcenodeid - an alias for sourceNodeId
- sourcenodename - source node name
- targetNodeId - target node for links storage
- targetnodeid - an alias to targetNodeId
- targetnodename - target node name
- env - environment domain name
- isAutoRestart [boolean] - auto restart after linking
${event.response.} - parameters are absent

onAfterLinkNodes¶

The event is executed after the linkNodes action. This event is run for each linking containers action. It is provided for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- groupAlias - alias for linking nodes
- alias - an alias for groupAlias
- sourceNodeId - source node for links storage
- sourcenodeid - an alias for sourceNodeId
- sourcenodename - source node name
- targetNodeId - target node for links storage
- targetnodeid - an alias to targetNodeId
- targetnodename - target node name
- env - environment domain name
- isAutoRestart [boolean] - auto restart after linking
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeUnlinkNodes¶

This event is executed before the unLinkNodes action and is run for each unlinking containers action. The onBeforeUnlinkNodes event is applied for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- alias - alias for unlinking nodes
- sourceNodeId - source node for links storage
- sourcenodeid an alias for sourceNodeId
- targetNodeId - target node for links storage
- targetnodeid an alias for targetNodeId
- targetnodename - target node name
- sourcenodename - source node name
- alias - an alias for groupAlias
- env - environment domain name
- isAutoRestart [boolean] - auto restart after unlinking
${event.response.} - parameters are absent

onAfterUnlinkNodes¶

This event is executed after the unLinkNodes action and is run for each unlinking containers action. The onAfterUnlinkNodes event is applied for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- alias - alias for unlinking nodes
- sourceNodeId - source node for links storage
- sourcenodeid an alias for sourceNodeId
- targetNodeId - target node for links storage
- targetnodeid an alias for targetNodeId
- targetnodename - target node name
- sourcenodename - source node name
- alias - an alias for groupAlias
- env - environment domain name
- isAutoRestart [boolean] - auto restart after unlinking
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeSetEnvVars¶

The event is triggered before the setEnvVars action. It is executed for every Docker or dockerized container before setting environment variables.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment domain name
- nodeId - current node identifier
- nodeid - an alias, the same value as nodeId
- data - variables set for a container
${event.response.} - parameters are absent

onAfterSetEnvVars¶

The event is triggered after the setEnvVars action. It is executed for every Docker or dockerized container upon setting environment variables.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment domain name
- nodeId - current node identifier
- nodeid - an alias, the same value as nodeId
- data - variables set for a container
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeSetEntryPoint¶

This event is called before the setEntryPoint action. It is executed for every Docker container before setting the entry point. The onBeforeSetEntryPoint event is applied for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeId - current node identifier
- data - entry point set for a container
${event.response.} - parameters are absent

onAfterSetEntryPoint¶

This event is called after the setEntryPoint action. It is executed for every Docker container upon setting the entry point. The onAfterSetEntryPoint event is applied for Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeId - current node identifier
- data - entry point set for a container
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeSetRunCmd¶

The event is executed before the setRunCmd action. It is triggered for every Docker container, before setting run configs. This event is compatible with Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment short domain name
- nodeId - current node identifier
- nodeid - an alias for nodeId
- data - run cmd set for a container
${event.response.} - parameters are absent

onAfterSetRunCmd¶

The event is executed after the setRunCmd action. It is triggered for every Docker container, upon setting run configs. This event is compatible with Docker containers only.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment short domain name
- nodeId - current node identifier
- nodeid - an alias for nodeId
- data - run cmd set for a container
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeStartService¶

This event is executed each time before running the Docker RunCmd commands. Thus, it is always carried out for each Docker container action, e.g. before starting/restarting container and starting environment.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeId - current node identifier
${event.response.} - parameters are absent

onAfterStartService¶

This event is executed each time after running the Docker RunCmd commands.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- nodeId - current node identifier
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeAddVolume¶

The event is performed before adding volumes to Docker container. It is executed once for each Docker container.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment short domain name
- nodeGroup - current node group
- nodeId - current node identifier
- nodeid - the same value as nodeId, an alias
- path - volume path
${event.response.} - parameters are absent

onAfterAddVolume¶

This event is performed after adding volumes to Docker container. It is executed once for each Docker container.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment short domain name
- nodeGroup - current node group
- nodeId - current node identifier
- nodeid - the same value as nodeId, an alias
- path - volume path
${event.response.}:
- result - result code. The successful action result is '0'
- nodeid - current node identifier

onBeforeRemoveVolume¶

The onBeforeRemoveVolume event is called before removing volumes from Docker container. It is executed once for each Docker container.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment short domain name
- nodeId - current node identifier
- nodeid - the same value as nodeId, an alias
- nodeGroup - current node group
- path - volume path
${event.response.} - parameters are absent

onAfterRemoveVolume¶

The onAfterRemoveVolume event is triggered after removing volumes from Docker container. It is executed once for each Docker container.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- name - environment display name
- env - environment short domain name
- nodeId - current node identifier
- nodeid - the same value as nodeId, an alias
- nodeGroup - current node group
- path - volume path
${event.response.}:
- result - result code. The successful action result is '0'
- nodeid - current node identifier

onBeforeInit¶

onBeforeInstall¶

It is possible to dynamically fill in the manifest fields using onBeforeInit and onBeforeInstall events. All of the JPS manifest fields inside onBeforeInit and onBeforeInstall can be accessed using jps variable.

onBeforeInit¶

The onBeforeInit event is executed:

on GetAppInfo request, which is called to display application installation dialog in the dashboard
on application installation

You can override all the parameters of the manifest, except for:

type
name
baseUrl

The GetAppInfo method has ownerUid parameter which allows to define a collaborator's account. Parameter is applied if the owner field is added to manifest. The account and quota placeholders will be filled in depending on defined account.

For example:

type: install
name: Account And Quota Placeholders
settings:
  fields: 
    - type: owner
      caption: Owner
      name: ownerUid
  onBeforeInit: |
     settings.fields.push({
       type: "string",
       caption: "Account",
       name: "email",
       value: "${account.email}"
     }, {
       type: "string",
      caption: "Cloudlets",
      name: "cloudlets",
      value: "${quota.environment.maxcloudletsperrec}"
     });
     return settings;

{
  "type": "install",
  "name": "Account And Quota Placeholders",
  "settings": {
    "fields": [
    {
    "type": "owner",
    "caption": "Owner",
    "name": "ownerUid"
    }
    ],
    "onBeforeInit": [
        "settings.fields.push({",
        "  type: 'string',",
        "  caption: 'Account',",
        "  name: 'email',",
        "  value: '${account.email}'",
        "},",
        "{",
        "  type: 'string',",
        "  caption: 'Cloudlets',",
        "  name: 'cloudlets',",
        "  value: '${quota.environment.maxcloudletsperrec}'",
        "});",
        "return settings;"
        ]
  }
}

onBeforeInstall¶

The onBeforeInstall event is executed before application installation but after onBeforeInit. The placeholders ${globals.} and ${settings.} can be used within onBeforeInstall. All of the manifest parameters can be overridden, except for:

type
name
baseUrl
globals
settings

onBeforeInit and onBeforeInstall can treat JavaScript code, written as:

string

type: update
name: "Ability to dynamically determine UI in JPS"  
onBeforeInit: |
  return {
    result: 0,
    settings : {
      fields: [{
        type : "string",
        caption: "Custom Field",
        name : "custom_field",
        "default" : "test"
      }]
    }
  };
onInstall:
assert: "'${settings.custom_field}' == 'test'"

{
  "type": "update",
  "name": "Ability to dynamically determine UI in JPS",
  "onBeforeInit": "return { \n  result: 0, \n  settings : {\n    fields: [{ \n      type : \"string\", \n      caption: \"Custom Field\",\n      name : \"custom_field\", \n      \"default\" : \"test\" \n    }]\n  }\n};\n",
  "onInstall": null,
  "assert": "'${settings.custom_field}' == 'test'"
}

string array

type: update
name: test
onBeforeInit:
- return {
- "  result: 0,"
- "  settings : {"
- "    fields: [{"
- "      type : 'string',"
- "      caption: 'Custom Field',"
- "      name : 'custom_field',"
- "      'default' : 'test'"
- "    }]"
- "  }"
- "};"

{
    "type": "update",
    "name": "test",

    "onBeforeInit": [
        "return {",
        "  result: 0,",
        "  settings : {",
        "    fields: [{",
        "      type : 'string',",
        "      caption: 'Custom Field',",
        "      name : 'custom_field',",
        "      'default' : 'test'",
        "    }]",
        "  }",
        "};"
    ]
}

URL

type: update  
name: "Ability to dynamically determine UI in JPS"  
onBeforeInit: https://gist.githubusercontent.com/SlavaKatiukha/4160926fdd7df13ae097a5194d42023e/raw/eff5ffa6015b8f997bfa31558524033193b6092a/
onInstall:  
assert: "'${settings.custom_field}' == 'test'"

{
"type": "update",  
"name": "Ability to dynamically determine UI in JPS",  
"onBeforeInit": "https://gist.githubusercontent.com/SlavaKatiukha/4160926fdd7df13ae097a5194d42023e/raw/eff5ffa6015b8f997bfa31558524033193b6092a/",
"onInstall": [
                { 
        "assert": [ 
            "'${settings.custom_field}' == 'test'" 
                    ]
                }
            ]
}

filepath in case the baseUrl was determined

type: update  
name: "Ability to dynamically determine UI in JPS"  
baseUrl: https://gist.githubusercontent.com/SlavaKatiukha/4160926fdd7df13ae097a5194d42023e/raw/eff5ffa6015b8f997bfa31558524033193b6092a/
onBeforeInit: InitManifestTest.cs  
onInstall:  
assert: "'${settings.custom_field}' == 'test'"

{
"type": "update",  
"name": "Ability to dynamically determine UI in JPS",  
"baseUrl": "https://gist.githubusercontent.com/SlavaKatiukha/4160926fdd7df13ae097a5194d42023e/raw/eff5ffa6015b8f997bfa31558524033193b6092a/" , 
"onBeforeInit": "InitManifestTest.cs",  
"onInstall": [
                { 
        "assert": [ 
            "'${settings.custom_field}' == 'test'" 
                    ]
                }
            ]
}

The script outputs JS-object. The object contains code result and manifest customized field set in JSON.

If the script has completed successfully with result: 0, then all the fields in the script response are applied to the manifest.
In case the script has completed unsuccessfully with result: 11041 along with message “JPS manifest initialization error”, the attached object data provides the details about an error.

Accessing JPS manifest fields with jps variable¶

onBeforeInit:

type: install
name: Manifest availability in onBeforeInit

baseUrl: https://example.com/

settings:
  fields:
    - type: string
      caption: String

onBeforeInit: |  
  return {
    result: 0,
    settings: {
      fields: jps.settings.fields.concat([{
        type: 'string',
        caption: 'Base URL',
        value: jps.baseUrl
      }])
    }
  };

{
  "type": "install",
  "name": "Manifest availability in onBeforeInit",
  "baseUrl": "https://example.com/",
  "settings": {
    "fields": [
      {
        "type": "string",
        "caption": "String"
      }
    ]
  },
  "onBeforeInit": "return {result: 0, settings: { fields: jps.settings.fields.concat([{ type: 'string', caption: 'Base URL', value: jps.baseUrl}])}};"
}

simplified response example:

type: install
name: Manifest availability in onBeforeInit

baseUrl: https://example.com/

settings:
  fields:
    - type: string
      caption: String

onBeforeInit: |  
  jps.settings.fields.push({
        type: 'string',
        caption: 'Base URL',
        value: jps.baseUrl
  });

  return jps;

{
  "type": "install",
  "name": "Manifest availability in onBeforeInit",
  "baseUrl": "https://example.com/",
  "settings": {
    "fields": [
      {
        "type": "string",
        "caption": "String"
      }
    ]
  },
  "onBeforeInit": "jps.settings.fields.push({type: 'string', caption: 'Base URL', value: jps.baseUrl}); return jps;"
}

onBeforeInstall:

type: install
name: Manifest availability in onBeforeInit

nodes:
  - nodeType: apache2
    cloudlets: 8

onBeforeInstall: |  
  return {
    result: 0,
    nodes: jps.nodes.concat({
      nodeType: 'nginx',
      cloudlets: 8
    })    
  };

{
  "type": "install",
  "name": "Manifest availability in onBeforeInit",
  "nodes": [
    {
      "nodeType": "apache2",
      "cloudlets": 8
    }
  ],
  "onBeforeInstall": "return {result: 0, nodes: jps.nodes.concat({ nodeType: 'nginx', cloudlets: 8})};"}

onBeforeSwapExtDomains¶

The event is executed before swapping the external domain names between two environments via API or Jelastic dashboard

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- targetAppid - "string" application identifier of the second environment
${event.response.}: parameters are absent

onAfterSwapExtDomains¶

The event is executed after swapping the external domain names between two environments via API or Jelastic dashboard.

Event Placeholders:

${event.params.}:
- session - current user session
- appid - environment unique appid
- targetAppid - "string" application identifier of the second environment
${event.response.}:
- result - result code. The successful action result is '0'

onBeforeSwapExtIps¶

The event is executed before swapping the external IPs between two environments via API or Jelastic CLI.

Event Placeholders:

${event.params.}:
- session - current user session
- sourceNodeId - source node of first IP
- targetNodeId - target node of second IP
- sourceIp - first IP
- targetIp - second IP
${event.response.}:
- reason - result code. The successful action result is '0'
- result - result code. The successful action result is '0'
- source - “string” error description

onAfterSwapExtIps¶

The event is executed after swapping the external IPs between two environments via API or Jelastic CLI.

Event Placeholders:

${event.params.}:
- session - current user session
- sourceNodeId - source node of first IP
- targetNodeId - target node of second IP
- sourceIp - first IP
- targetIp - second IP
${event.response.}:
- reason - result code. The successful action result is '0'
- result - result code. The successful action result is '0'
- source - “string” error description

onAfterConfirmTransfer¶

The event is called upon user confirms changing of an environment ownership from one Jelastic account to another within a single hosting service provider. Confirmation occurs once user clicks on a link in an appropriate email.

Event subscription example:

type: update
name: 'Environment Transfer Testing script'

onAfterConfirmTransfer:
  - log: env ${env.name} transfer confirmed

{
  "type": "update",
  "name": "Environment Transfer Testing script",
  "onAfterConfirmTransfer": [
    {
      "log": "env ${env.name} transfer confirmed"
    }
  ]
}

onBeforeBindSSL¶

The event is executed before binding a custom SSL certificate to the environment.

Event Placeholders:

${event.params.}:
- env - environment short domain name
${event.response.}:
- result - result code. The successful action result is '0'

type: update
name: '[CS] - add onBeforeBindSSL event'
onBeforeBindSSL: 
  log: before bind SSL

{
  "type": "update",
  "name": "[CS] - add onBeforeBindSSL event",
  "onBeforeBindSSL": {
    "log": "before bind SSL"
  }
}

onAfterBindSSL¶

The event is executed after binding a custom SSL certificate to the environment.

Event Placeholders:

${event.params.}:
- env - environment short domain name
${event.response.}:
- result - result code. The successful action result is '0'

type: update
name: '[CS] - add onAfterBindSSL event'
onAfterBindSSL: 
  log: after bind SSL

{
  "type": "update",
  "name": "[CS] - add onAfterBindSSL events",
  "onAfterBindSSL": {
    "log": "after bind SSL"
  }
}

onBeforeRemoveSSL¶

The event is executed before removing a custom SSL certificate from the environment.

Event Placeholders:

${event.params.}:
- env - environment short domain name
${event.response.}:
- result - result code. The successful action result is '0'

type: update
name: '[CS] - add onBeforeRemoveSSL events'
onBeforeRemoveSSL: 
  log: before remove SSL

{
  "type": "update",
  "name": "[CS] - add onBeforeRemoveSSL events",
  "onBeforeRemoveSSL": {
    "log": "before remove SSL"
  }
}

onAfterRemoveSSL¶

The event is executed after removing a custom SSL certificate from the environment.

Event Placeholders:

${event.params.}:
- env - environment short domain name
${event.response.}:
- result - result code. The successful action result is '0'

type: update
name: '[CS] - add onAfterRemoveSSL events'
onAfterRemoveSSL: 
  log: after remove SSL

{
  "type": "update",
  "name": "[CS] - add onAfterRemoveSSL events",
  "onAfterRemoveSSL": {
    "log": "after remove SSL"
  }
}

onBeforeInstallAddon¶

The event is executed before add-on installation

Event Placeholders:

${event.params.}:
- settings - custom form with predefined user input elements
- id - unique add-on id
- lang - user's language code which was used during the installation. Optional parameter
- region - region, where an environment will be installed
- targetAppid - unique environment appid at the Jelastic Platform
${event.response.}: parameters are absent

onAfterInstallAddon¶

The event is executed after add-on installation

${event.params.}:
- settings - custom form with predefined user input elements
- id - unique add-on id
- lang - user's language code which was used during the installation. Optional parameter
- region - region, where an environment will be installed
- targetAppid - unique environment appid at the Jelastic Platform
${event.response.}:
- uniqueName - installed add-on unique name
- appid - unique environment appid at the Jelastic Platform
- successText- message that appears once action is successfully performed

Events Subscription Example:

type: update  
name: Test Add-on Events Subscription  

onBeforeInstallAddon [nodeGroup:cp, id:myaddon]:  
  log: add-on  
  ID: ${event.params.id}  

onAfterInstallAddon [nodeGroup:cp, id:myaddon]:  
  log: add-on  
  unique name: ${event.response.uniqueName}

  {
  "type": "update",
  "name": "Test Add-on Events Subscription",
  "onBeforeInstallAddon [nodeGroup:cp, id:myaddon": {
    "log": "add-on",
    "ID": "${event.params.id}"
  },
  "onAfterInstallAddon [nodeGroup:cp, id:myaddon]": {
    "log": "add-on",
    "unique name": "${event.response.uniqueName}"
  }
}

Triggering:

type: update  
name: Test Add-on Events Triggering

targetNodes:
  nodeGroup: cp

id: myaddon

onInstall:
  log: triggers test

{
  "type": "update",
  "name": "Test Add-on Events Triggering",
  "targetNodes": {
    "nodeGroup": "cp"
  },
  "id": "myaddon",
  "onInstall": {
    "log": "triggers test"
  }
}

What’s next?

Find out how to fetch parameters with Placeholders
See how to use Conditions and Iterations
Read how to integrate your Custom Scripts
Learn how to create your custom Add-Ons
Check how to handle Custom Responses

Report an Error

Events¶

Events Execution Rules¶

Events Filtering¶

Events Execution Sequence¶

Event List¶

onInstall¶

onUninstall¶

onBeforeChangeTopology¶

onAfterChangeTopology¶

onBeforeScaleOut¶

onAfterScaleOut¶

onBeforeScaleIn¶

onAfterScaleIn¶

onBeforeServiceScaleOut¶

onAfterServiceScaleOut¶

onAlert¶

onBeforeRestartNode¶

onAfterRestartNode¶

onBeforeDelete¶

onBeforeAddNode¶

onAfterAddNode¶

onBeforeCloneNodes¶

onAfterCloneNodes¶

onBeforeLinkNode¶

onAfterLinkNode¶

onBeforeAttachExtIp¶

onAfterAttachExtIp¶

onBeforeDetachExtIp¶

onAfterDetachExtIp¶

onBeforeUpdateVcsProject¶

onAfterUpdateVcsProject¶

onBeforeSetCloudletCount¶

onAfterSetCloudletCount¶

onBeforeChangeEngine¶

onAfterChangeEngine¶

onBeforeStart¶

onAfterStart¶

onBeforeStop¶

onAfterStop¶

onBeforeClone¶

onAfterClone¶

onBeforeBuildProject¶

onAfterBuildProject¶

onBeforeDeploy¶

onAfterDeploy¶

onBeforeResetNodePassword¶

onAfterResetNodePassword¶

onBeforeResetServicePassword¶

onAfterResetServicePassword¶

onBeforeRemoveNode¶

onAfterRemoveNode¶

onBeforeRestartContainer¶

onAfterRestartContainer¶

onBeforeMigrate¶

onAfterMigrate¶

onBeforeRedeployContainer¶

onAfterRedeployContainer¶

onBeforeLinkNodes¶

onAfterLinkNodes¶

onBeforeUnlinkNodes¶

onAfterUnlinkNodes¶

onBeforeSetEnvVars¶

onAfterSetEnvVars¶

onBeforeSetEntryPoint¶

onAfterSetEntryPoint¶

onBeforeSetRunCmd¶

onAfterSetRunCmd¶

onBeforeStartService¶

onAfterStartService¶

onBeforeAddVolume¶

onAfterAddVolume¶

onBeforeRemoveVolume¶

onAfterRemoveVolume¶

onBeforeInit¶

onBeforeInstall¶

onBeforeInit¶

onBeforeInstall¶

Accessing JPS manifest fields with jps variable¶

onBeforeSwapExtDomains¶